VILLA RENOVATIONS · COSTA DEL SOLEnglish · Español · Nederlands
COSTA DEL SOL RENOVATIONS

Choosing materials and finishes

The right finish suits the substrate, the environment and the care you are prepared to give it.

Costa del Sol Renovations editorial team · Updated 13 November 2026

How do you compare finishes fairly?

Compare a complete material system: substrate preparation, installation, joints, edges and maintenance. A sample establishes appearance, not suitability for a wet room, terrace or coastal exposure. Ask for the relevant product documentation and a project-specific specification.

How do you compare finishes fairly?
FinishQuestions for the specificationKeep for handover
Natural stoneWhich stone, surface treatment, layout and edge details?Batch references, cleaning instructions and approved sample.
Porcelain tileWhich format, substrate preparation, joints and transition heights?Product reference, layout and agreed spare tiles.
Continuous finishWhich complete system and reinforcement or movement details?System specification, care instructions and repair approach.

Look beyond the visible surface

A material choice includes the surface beneath it and the way the system is installed. Ask what preparation is included, how level differences will be handled and how joints meet adjacent finishes. In wet areas and outdoors, product suitability and the full build-up should be established by the relevant professional using the manufacturer’s documentation.

Approve a representative sample

A small sample may not show the variation of an entire stone slab, timber batch or plaster wall. Agree what range of colour, grain and texture is acceptable. Where alignment matters, use a setting-out drawing. Keep an approved sample on site so that delivery checks and installation decisions refer to the same expectation.

Plan for living with the finish

Discuss cleaning products, staining, repair and replacement before ordering. Compare the complete installed system and care requirements rather than the supply price alone. Consider whether an extra quantity from the same batch should be kept for future repairs. Record product references and care instructions in the handover information.

Your planning checklist

  • Substrate assessment
  • Manufacturer’s suitability information
  • Approved samples and setting-out
  • Edge and movement-joint details
  • Care instructions and spare materials

Planning guidance. Final specifications, permissions, costs and timescales depend on a property survey and the agreed scope.

Your next chapter
starts with a conversation.

A complete transformation or a carefully chosen change. Tell us what you have in mind.

Discuss your project
Talk to us